Match the instruments in Column-$I$ with their respective least counts in Column-$II$.

Column-$I$	Column-$II$
$(1)$ Traveling Microscope	$(a)$ $0.01\,cm$
$(2)$ Screw Gauge	$(b)$ $0.001\,cm$
	$(c)$ $0.0001\,cm$

In a screw gauge,$5$ complete rotations of the circular scale give a $1.5 \, mm$ reading on the linear scale. The circular scale has $50$ divisions. The least count of the screw gauge is: (in $, mm$)

$A$ student measured the length of a rod and wrote it as $3.50\;cm$. Which instrument did he use to measure it?

In a screw gauge, the zero of the circular scale lies $3$ divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument, the thickness of a sheet is measured. If the pitch scale reading is $1 \ mm$ and the circular scale reading is $51$, then the correct thickness of the sheet is . . . . . . $mm$. [Assume least count is $0.01 \ mm$]

In a Vernier Calipers,$10$ divisions of the Vernier scale are equal to $9$ divisions of the main scale. When both jaws of the Vernier calipers touch each other,the zero of the Vernier scale is shifted to the left of the zero of the main scale,and the $4^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. One main scale division is equal to $1\,mm$. While measuring the diameter of a spherical body,the body is held between the two jaws. It is observed that the zero of the Vernier scale lies between $30$ and $31$ divisions of the main scale,and the $6^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. The diameter of the spherical body is $.......\,cm$.

$A$ spectrometer gives the following reading when used to measure the angle of a prism.
Main scale reading : $58.5^{\circ}$
Vernier scale reading : $09$ divisions
Given that $1$ division on the main scale corresponds to $0.5^{\circ}$. The total number of divisions on the Vernier scale is $30$,which matches $29$ divisions of the main scale. The angle of the prism from the above data is ....... . (in $^{\circ}$)