$A$ maximum current of $0.5 \ mA$ can pass through a galvanometer of resistance $15 \ \Omega$. The resistance to be connected in series to the galvanometer to convert it into a voltmeter of range $0-10 \ V$ is (in $\Omega$)

When a galvanometer is shunted with a $4\,\Omega$ resistance,the deflection is reduced to one-fifth. If the galvanometer is further shunted with a $2\,\Omega$ wire,the further reduction in the deflection will be (the main current remains same).

The current sensitivity of a moving coil galvanometer can be increased by

$A$ galvanometer has resistance '$G$' and range '$V_g$'. How much resistance is required to read voltage up to '$V$' volt?

To send $10 \%$ of the main current through a moving coil galvanometer of resistance $99 \Omega$,the shunt required is . . . . . . . (in $\Omega$)

$A$ galvanometer of $50 \, \Omega$ resistance has $25$ divisions. $A$ current of $4 \times 10^{-4} \, A$ gives a deflection of one division. To convert this galvanometer into a voltmeter having a range of $25 \, V$, it should be connected with a resistance of