$A$ wire of length $100 \ cm$ and area of cross-section $2 \ mm^2$ is stretched by two forces of each $440 \ N$ applied at the ends of the wire in opposite directions along the length of the wire. If the elongation of the wire is $2 \ mm$,the Young's modulus of the material of the wire is:

The force required to stretch a wire of cross-section $1 \ cm^{2}$ to double its length will be ........ $\times 10^{7} \ N$. (Given Young's modulus of the wire $= 2 \times 10^{11} \ N/m^{2}$)

With a rise in temperature,the Young's modulus of elasticity

An area of cross-section of a rubber string is $2 \, cm^2$. Its length is doubled when stretched with a linear force of $2 \times 10^5 \, dynes$. The Young's modulus of the rubber in $dyne/cm^2$ will be:

In an experiment,brass and steel wires of length $1\,m$ each with areas of cross-section $1\,mm^2$ are used. The wires are connected in series and one end of the combined wire is connected to a rigid support,while the other end is subjected to an elongation. The stress required to produce a total elongation of $0.2\,mm$ is: [Given: Young's Modulus for steel and brass are $120 \times 10^9\,N/m^2$ and $60 \times 10^9\,N/m^2$ respectively]

Two wires $A$ and $B$ are stretched by the same force. If,for $A$ and $B$,$Y_A: Y_B = 1: 2$,$r_A: r_B = 3: 1$,and $L_A: L_B = 4: 1$,then the ratio of their extension $\left(\frac{\Delta L_A}{\Delta L_B}\right)$ will be .............