$A$ window used to thermally insulate a room from outside consists of two parallel glass sheets each of area $2.6 \,m^2$ and thickness $1 \,cm$ separated by $5 \,cm$ thick stagnant air. In the steady state, the room-glass interface is at $18^{\circ} C$ and the glass-outdoor interface is at $-2^{\circ} C$. If the thermal conductivities of glass and air are respectively $0.8 \,Wm^{-1} K^{-1}$ and $0.08 \,Wm^{-1} K^{-1}$, the rate of flow of heat through the window is (in $\,W$)

$A$ cylinder of radius $R$ made of a material of thermal conductivity $k_1$ is surrounded by a cylindrical shell of inner radius $R$ and outer radius $2R$ made of a material of thermal conductivity $k_2$. The two ends of the combined system are maintained at different temperatures. There is no loss of heat from the cylindrical surface and the system is in steady state. The effective thermal conductivity of the system is

Consider the situation as shown in the figure. Find the amount of heat flowing per second through a cross-section of the bent part,if the total heat taken out per second from the end at $200^{\circ} C$ is $150 \ J/s$.

Two metal rods are arranged as shown in the figure. Their thermal conductivities are $K_1$ and $K_2$. What is their equivalent thermal conductivity?

Two rods of same length and material transfer a given amount of heat in $12 \ s$,when they are joined end to end. But when they are joined along their lengths (parallel combination),then they will transfer the same amount of heat under the same conditions in time $t = \dots \ s$.

An insulated container is filled with ice at $0\,^{\circ}\text{C}$,and another container is filled with water that is continuously boiling at $100\,^{\circ}\text{C}$. In a series of experiments,the containers are connected by various thick metal rods that pass through the walls of the container as shown in the figure.
In experiment $I$: a copper rod is used and all ice melts in $20$ minutes.
In experiment $II$: a steel rod of identical dimensions is used and all ice melts in $80$ minutes.
In experiment $III$: both the rods are used in series and all ice melts in $t_{10}$ minutes.
In experiment $IV$: both rods are used in parallel and all ice melts in $t_{20}$ minutes.