$A$ glass capillary tube of inner diameter $0.28 \ mm$ is lowered vertically into water in a vessel. The pressure to be applied on the water in the capillary tube so that the water level in the tube is the same as that in the vessel (in $N/m^2$) is:
Surface tension of water $= 0.07 \ N/m$
Atmospheric pressure $= 10^5 \ N/m^2$

$A$ spherical soap bubble inside an air chamber at pressure $P_0 = 10^5 \ Pa$ has a certain radius $R$ such that the excess pressure inside the bubble is $\Delta P = 144 \ Pa$. Now,the chamber pressure is reduced to $8P_0 / 27$ so that the bubble radius and its excess pressure change. In this process,all temperatures remain unchanged. Assume air to be an ideal gas and the excess pressure $\Delta P$ in both cases to be much smaller than the chamber pressure. The new excess pressure $\Delta P'$ in $Pa$ is:

The diameter of a rain-drop is $0.02 \, cm$. If the surface tension of water is $72 \times 10^{-3} \, N/m$,then the pressure difference between the internal and external surfaces of the drop will be:

$A$ glass tube of uniform internal radius has a valve separating two identical ends. Initially,the valve is in a tightly closed position. End $1$ has a hemispherical soap bubble of radius $r$. End $2$ has a soap bubble with a radius of curvature $R$ $(R > r)$ as shown in the figure. Just after opening the valve,

$A$ bubble of $8$ mm diameter is formed in the air. The surface tension of soap solution is $30$ dynes/cm. The excess pressure inside the bubble is ........ $dynes/cm^2$.

An air bubble doubles its radius on rising from the bottom of a water reservoir to the surface. If the atmospheric pressure is equal to $10 \, m$ of water,the height of the water in the reservoir is ..... $m$.