A copper wire and an aluminium wire have leng | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Given: Ratio of lengths $l_1: l_2 = 5: 2$, ratio of diameters $d_1: d_2 = 4: 3$, and ratio of forces $F_1: F_2 = 4: 5$.Since $A = \pi r^2 = \pi (d

Vedclass · Accepted Answer

$\frac{63}{88}$

Vedclass · Answer

(B) Given: Ratio of lengths $l_1: l_2 = 5: 2$, ratio of diameters $d_1: d_2 = 4: 3$, and ratio of forces $F_1: F_2 = 4: 5$.Since $A = \pi r^2 = \pi (d/2)^2$, the ratio of areas is $A_1: A_2 = d_1^2: d_2^2 = 4^2: 3^2 = 16: 9$.Young's modulus is given by $Y = \frac{FL}{A \Delta l}$, so the increase in length is $\Delta l = \frac{FL}{AY}$.Therefore, the ratio of increase in length is $\frac{\Delta l_1}{\Delta l_2} = \frac{F_1}{F_2} 	imes \frac{l_1}{l_2} 	imes \frac{A_2}{A_1} 	imes \frac{Y_2}{Y_1}$.Substituting the values: $\frac{\Delta l_1}{\Delta l_2} = \left(\frac{4}{5}ight) 	imes \left(\frac{5}{2}ight) 	imes \left(\frac{9}{16}ight) 	imes \left(\frac{0.7 	imes 10^{11}}{1.1 	imes 10^{11}}ight)$.$\frac{\Delta l_1}{\Delta l_2} = 2 	imes \frac{9}{16} 	imes \frac{7}{11} = \frac{18}{16} 	imes \frac{7}{11} = \frac{9}{8} 	imes \frac{7}{11} = \frac{63}{88}$.Thus, the ratio is $\frac{63}{88}$.

Similar Questions

$A$ steel rod has a radius of $10 \,mm$ and a length of $1.0 \,m$. $A$ force stretches it along its length and produces a strain of $0.32 \%$. The Young's modulus of the steel is $2.0 \times 10^{11} \,N/m^2$. What is the magnitude of the force stretching the rod in $kN$?

The density of a rubber cord is $d$. $A$ thick rubber cord of length $L$ and cross-sectional area $A$ undergoes elongation under its own weight when suspended vertically. This elongation is proportional to:

The length of a wire is $l_1$ when a mass $M_1$ is hung from it,and it is $l_2$ when both masses $M_1$ and $M_2$ are hung from it. The natural length of the wire is ........

When a weight of $10 \,kg$ is suspended from a copper wire of length $3 \,m$ and diameter $0.4 \,mm$, its length increases by $2.4 \,cm$. If the diameter of the wire is doubled, then the extension in its length will be (in $\,cm$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module