$A$ brass wire of length $2 \ m$ and radius $1 \ mm$ at $27 ^\circ C$ is held taut between two rigid supports. Initially, it was cooled to a temperature of $-43 ^\circ C$, creating a tension $T$ in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to $1.4 \ T$ is . . . . . . $^\circ C$.

Two wires of the same length and material are stretched by the same force. If their masses are in the ratio $3:4$,then the ratio of their elongations is

If the ratio of diameters,lengths,and Young's modulus of steel and copper wires shown in the figure are $p, q$ and $s$ respectively,then the corresponding ratio of increase in their lengths would be

$A$ horizontal steel railroad track has a length of $100 \, m$ when the temperature is $25^{\circ} C$. The track is constrained from expanding or bending. The stress on the track on a hot summer day,when the temperature is $40^{\circ} C$,is ............. $\times 10^7 \, Pa$. (Note: The linear coefficient of thermal expansion for steel is $1.1 \times 10^{-5} /^{\circ} C$ and the Young's modulus of steel is $2 \times 10^{11} \, Pa$.)

The mean distance between the atoms of iron is $3 \times 10^{-10} \ m$ and the interatomic force constant for iron is $7 \ N/m$. The Young's modulus of elasticity for iron is:

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be: