A half-wave rectifier provides a load current | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) For a half-wave rectifier,the peak voltage $V_m$ is given by $V_m = \sqrt{2} 	imes V_{rms}$.Given $V_{rms} = 220 \ V$,so $V_m = 1.414 	imes 220

Vedclass · Accepted Answer

$99 \ V, 99 \ mA$

Vedclass · Answer

(C) For a half-wave rectifier,the peak voltage $V_m$ is given by $V_m = \sqrt{2} 	imes V_{rms}$.Given $V_{rms} = 220 \ V$,so $V_m = 1.414 	imes 220 \approx 311.13 \ V$.The average $DC$ voltage $V_{dc}$ is given by $V_{dc} = \frac{V_m}{\pi}$.$V_{dc} = \frac{311.13}{3.14} \approx 99.08 \ V \approx 99 \ V$.The average $DC$ current $I_{dc}$ is given by $I_{dc} = \frac{V_{dc}}{R_L}$.Given $R_L = 1 \ k\Omega = 1000 \ \Omega$.$I_{dc} = \frac{99 \ V}{1000 \ \Omega} = 0.099 \ A = 99 \ mA$.Thus,the average $DC$ voltage is $99 \ V$ and the average $DC$ current is $99 \ mA$.

$A$ half-wave rectifier provides a load current of $1 \ k\Omega$. The input voltage is $220 \ V$. Neglecting the diode resistance,the values of average $DC$ voltage and average $DC$ current are respectively:

Similar Questions

Write the principle of a rectifier.

The peak voltage in the output of a half-wave diode rectifier fed with a sinusoidal signal without a filter is $10 \, V$. The $dc$ component of the output voltage is

$A$ sinusoidal voltage of peak value $200 \ V$ is connected to a diode and resistor $R$ in the circuit shown so that half-wave rectification occurs. If the forward resistance of the diode is negligible compared to $R$,the rms voltage (in volt) across $R$ is approximately:

In a half-wave rectifier using a $PN$ junction diode,the input voltage has an amplitude of $25 \ V$ and a frequency of $50 \ Hz$. No filter is used,and the load resistance is $1000 \ \Omega$. The forward resistance of the diode is $10 \ \Omega$. The ripple factor is:

$A$ diode detector is used to detect an amplitude modulated wave of $60\%$ modulation by using a condenser of capacity $250\, pF$ in parallel with a load resistance $100\, k\Omega$. Find the maximum modulated frequency which could be detected by it.

Vedclass Test Series

Exam Paper Generator

Online Exam Module