A galvanometer may be converted into an ammet | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) To convert a galvanometer into an ammeter,a very small resistance (shunt) is connected in parallel. Thus,the resistance of an ammeter is very low.

Vedclass · Accepted Answer

$A$ voltmeter of range $10 \, V$

Vedclass · Answer

(D) To convert a galvanometer into an ammeter,a very small resistance (shunt) is connected in parallel. Thus,the resistance of an ammeter is very low.To convert a galvanometer into a voltmeter,a very large resistance is connected in series. Thus,the resistance of a voltmeter is very high.For a voltmeter,the resistance $R$ is given by $R = (V / I_g) - G$,where $V$ is the range,$I_g$ is the full-scale deflection current $(1 \, mA)$,and $G$ is the galvanometer resistance.Since $R$ is directly proportional to the voltage range $V$,the voltmeter with the highest range will have the largest resistance.Comparing the two voltmeters ($5 \, V$ and $10 \, V$),the voltmeter with a range of $10 \, V$ will have the largest resistance.

$A$ galvanometer may be converted into an ammeter or a voltmeter. In which of the following cases will the resistance of the device be the largest? (Assume the maximum range of the galvanometer is $1 \, mA$)

Similar Questions

Explain the construction and principle of a moving coil galvanometer.

The pointer of a dead-beat galvanometer gives a steady deflection because

$A$ galvanometer has a deflection of $25$ divisions for a current of $0.1 \ A$ flowing through it. Then the current sensitivity of the galvanometer is (in $div/A$)

$A$ galvanometer with its coil resistance $25\,\Omega$ requires a current of $1\,mA$ for its full-scale deflection. In order to construct an ammeter to read up to a current of $2\,A$,the approximate value of the shunt resistance should be:

Vedclass Test Series

Exam Paper Generator

Online Exam Module