$A$ disc of circumference $s$ is at rest at a point $A$ on a horizontal surface when a constant horizontal force begins to act on its centre. Between $A$ and $B$ there is sufficient friction to prevent slipping,and the surface is smooth to the right of $B$. $AB = s$. The disc moves from $A$ to $B$ in time $T$. To the right of $B$,

$A$ man spinning in free space changes the shape of his body,e.g.,by spreading his arms or curling up. By doing this,he can change his

Two discs have moments of inertia $I_{1}$ and $I_{2}$ about their respective axes perpendicular to the plane and passing through the centre. They are rotating with angular speeds $\omega_{1}$ and $\omega_{2}$ respectively and are brought into contact face to face with their axes of rotation coaxial. The loss in kinetic energy of the system in the process is given by:

Consider regular polygons with number of sides $n=3, 4, 5, \ldots$ as shown in the figure. The center of mass of all the polygons is at height $h$ from the ground. They roll on a horizontal surface about the leading vertex without slipping and sliding as depicted. The maximum increase in height of the locus of the center of mass for each polygon is $\Delta$. Then $\Delta$ depends on $n$ and $h$ as

$A$ thin rod of mass $M$ and length $a$ is free to rotate in a horizontal plane about a fixed vertical axis passing through point $O$. $A$ thin circular disc of mass $M$ and radius $a/4$ is pivoted on this rod with its center at a distance $a/4$ from the free end so that it can rotate freely about its vertical axis,as shown in the figure. Assume that both the rod and the disc have uniform density and they remain horizontal during the motion. An outside stationary observer finds the rod rotating with an angular velocity $\Omega$ and the disc rotating about its vertical axis with angular velocity $4\Omega$. The total angular momentum of the system about the point $O$ is $\left(\frac{Ma^2\Omega}{48}\right) n$. The value of $n$ is. . . . .

$A$ disc having velocity $v_0$ and angular speed $\omega_0$ in the anticlockwise direction is placed on a rough plank. Initially,the plank is at rest. (Assume the length of the plank is very large). Choose the $INCORRECT$ option.