A 110 , V d.c. heater is used on an a.c. sour | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The heat produced by a heater in a resistance $R$ over time $t$ is given by $H = \frac{V^2}{R} t$.For $d.c.$ voltage,$H_{dc} = \frac{V_{dc}^2}{R}

Vedclass · Accepted Answer

$110$

Vedclass · Answer

(A) The heat produced by a heater in a resistance $R$ over time $t$ is given by $H = \frac{V^2}{R} t$.For $d.c.$ voltage,$H_{dc} = \frac{V_{dc}^2}{R} t$.For $a.c.$ voltage,the heat produced is determined by the $r.m.s.$ value of the voltage,$H_{ac} = \frac{V_{rms}^2}{R} t$.Given that the heat produced is the same in both cases $(H_{ac} = H_{dc})$,we have:$\frac{V_{rms}^2}{R} t = \frac{V_{dc}^2}{R} t$$V_{rms}^2 = V_{dc}^2$$V_{rms} = V_{dc}$Given $V_{dc} = 110 \, V$,therefore $V_{rms} = 110 \, V$.

$A$ $110 \, V$ $d.c.$ heater is used on an $a.c.$ source,such that the heat produced is the same as it produces when connected to $110 \, V$ $d.c.$ in the same time intervals. What would be the $r.m.s.$ value of the alternating voltage?

Similar Questions

$A$ current in a circuit is given by $i = 3 + 4 \sin \omega t$. The effective value of the current is

In an $AC$ circuit,the current is given by $I = 100 \sin(200 \pi t)$. The time required for the current to achieve its peak value will be:

If an alternating voltage is represented as $E = 141 \sin(628 t)$,then the rms value of the voltage and the frequency are respectively:

For a domestic $AC$ supply of $220 \ V$ at $50 \ \text{cycles per sec}$, the potential difference between the terminals of a two-pin electric outlet in a room is given by

An $ac$ generator produces an output voltage $E = 170 \sin(377t) \text{ volts}$,where $t$ is in seconds. The frequency of the $ac$ voltage is......$Hz$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module