$A$ $1\,m$ long metal rod $XY$ completes the circuit as shown in the figure. The plane of the circuit is perpendicular to the magnetic field of flux density $0.15\,T$. If the resistance of the circuit is $5\,\Omega$,the force needed to move the rod in the direction indicated with a constant speed of $4\,m/s$ will be $................\,10^{-3}\,N$.

$A$ circular conducting coil of radius $1\, m$ is being heated by the change of magnetic field $\vec{B}$ passing perpendicular to the plane in which the coil is laid. The resistance of the coil is $2\, \mu\Omega$. The magnetic field is slowly switched off such that its magnitude changes in time as $B = \frac{4}{\pi} \times 10^{-3} T \left(1 - \frac{t}{100}\right)$. The energy dissipated by the coil before the magnetic field is switched off completely is $E = .....\, mJ$.

The figure shows a straight wire placed between the pole pieces of a magnet. An induced emf will be developed across the ends of the wire when it is moved towards:

An aeroplane,with its wings spread $10 \, m$,is flying at a speed of $180 \, km/h$ in a horizontal direction. The total intensity of the Earth's magnetic field at that location is $2.5 \times 10^{-4} \, Wb/m^2$ and the angle of dip is $60^{\circ}$. The $EMF$ induced between the tips of the plane's wings will be ...... $mV$.

$A$ bicycle wheel of radius $R$ has $n$ spokes. It is rotating at the rate of $F$ r.p.m. perpendicular to the horizontal component of earth's magnetic field $\vec{B}$. The e.m.f. induced between the rim and the centre of the wheel is

In an $AC$ generator, if a coil of $N$ turns and area $A$ is rotated at $v$ revolutions per second in a uniform magnetic field $B$, then the motional $EMF$ produced is equal to (At $t=0$ $s$, the coil is perpendicular to the field).