$A$ circular disc has a mass of $1\ kg$ and radius $40\ cm$. It is rotating about an axis passing through its centre and perpendicular to its plane with a speed of $10\ rev/s$. The work done in joules in stopping it would be ...... $J$

$A$ uniform solid cylinder of mass $M$ and radius $R$ can freely rotate around its axis $O$. There is an elastic string of relaxed length $L$ and stiffness $K$ attached to the cylinder and a static wall. Initially,the string is relaxed. As the cylinder starts rotating,the string will wind around the cylinder. The surface of the cylinder is very rough,so the string does not slip on the cylinder's surface. The minimum initial angular speed of the cylinder,${\omega _0}$,so that it can rotate through an angle $2\pi$ is (Assume Hooke's law to be valid.)

Write the formula for power and angular momentum in rotational motion.

$A$ wheel is rotating with an angular speed of $20\ rad/s$. It is stopped to rest by applying a constant torque in $4\ s$. If the moment of inertia of the wheel about its axis is $0.20\ kg\cdot m^2$,then the work done by the torque in two seconds will be .......... $J$.

The $M.I.$ of a body about the given axis is $1.2 \, kg \cdot m^2$ and initially the body is at rest. In order to produce a rotational kinetic energy of $1500 \, J$,an angular acceleration of $25 \, rad/s^2$ must be applied about that axis for a duration of ........ $s$.

$A$ thin uniform rod $AB$ of mass $m$ and length $l$ is hinged at one end $A$ to the ground level. Initially, the rod stands vertically and is allowed to fall freely to the ground in the vertical plane. The angular velocity of the rod when its $B$ end strikes the ground is $(g = \text{acceleration due to gravity})$