$A$ cylindrical rod with one end in a steam chamber and the other end in ice results in melting of $0.1 \ gm$ of ice per second. If the rod is replaced by another with half the length and double the radius of the first,and if the thermal conductivity of the material of the second rod is $\frac{1}{4}$ that of the first,the rate at which ice melts in $gm/sec$ will be:

Two plates $A$ and $B$ have thermal conductivities $84 \, W m^{-1} K^{-1}$ and $126 \, W m^{-1} K^{-1}$ respectively. They have the same surface area and same thickness. They are placed in contact along their surfaces. If the temperatures of the outer surfaces of $A$ and $B$ are kept at $100^{\circ} C$ and $0^{\circ} C$ respectively,then the temperature of the surface of contact in steady state is $.......... \, ^{\circ} C$.

The two ends of a metal rod are maintained at temperatures $100 ^\circ C$ and $110 ^\circ C$. The rate of heat flow in the rod is found to be $4.0 \ J/s$. If the ends are maintained at temperatures $200 ^\circ C$ and $210 ^\circ C$,the rate of heat flow will be.... $J/s$

The figure shows a system of two concentric spheres of radii $r_1$ and $r_2$ kept at temperatures $T_1$ and $T_2$,respectively. The radial rate of flow of heat in a substance between the two concentric spheres is proportional to

$A$ cylindrical rod has temperatures $\theta_1$ and $\theta_2$ at its ends. The rate of heat flow is $Q$. All the linear dimensions of the rod are doubled while keeping the temperatures constant. The new rate of flow of heat is

$A$ copper pipe of length $10 \,m$ carries steam at temperature $110^{\circ} C$. The outer surface of the pipe is maintained at a temperature $10^{\circ} C$. The inner and outer radii of the pipe are $2 \,cm$ and $4 \,cm$,respectively. The thermal conductivity of copper is $0.38 \,kW / m /^{\circ} C$. In the steady state,the rate at which heat flows radially outward through the pipe is closest to ............. $\,kW$.