$A$ galvanometer whose resistance is $120 \, \Omega$ gives full-scale deflection with a current of $0.05 \, A$. To enable it to read a maximum current of $10 \, A$,a shunt resistance is added in parallel with it. The resistance of the ammeter so formed is .............. $\Omega$.

$A$ galvanometer is used in a laboratory for detecting the null point in electrical experiments. If, on passing a current of $6 \ mA$, it produces a deflection of $2^{\circ}$, its figure of merit is close to (each division is $1^{\circ}$):

$A$ small cylindrical soft iron piece is kept in a galvanometer so that

$A$ galvanometer of resistance $50 \ \Omega$ is connected to a battery of $8 \ V$ along with a resistance of $3950 \ \Omega$ in series. $A$ full-scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $15$ divisions,the resistance in series should be . . . . . . $\Omega$.

When a resistance of $200\Omega$ is connected in series with a galvanometer of resistance $G$, its range is $V$. To triple its range, a resistance of $2000\Omega$ is connected in series. The value of $G$ is (in $\Omega$)

With a resistance $X$ connected in series with a galvanometer of resistance $100 \Omega$,it acts as a voltmeter of range $0-15 \ V$. To double the range,a resistance of $1500 \Omega$ is to be connected in series with $X$. The value of $X$ in ohm is: