A gas is filled in an organ pipe and it is so | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The fundamental frequency of an organ pipe is given by $f = \frac{v}{2L}$ (for open pipe) or $f = \frac{v}{4L}$ (for closed pipe).In both cases,$f

Vedclass · Accepted Answer

Both $(B)$ and $(C)$.

Vedclass · Answer

(D) The fundamental frequency of an organ pipe is given by $f = \frac{v}{2L}$ (for open pipe) or $f = \frac{v}{4L}$ (for closed pipe).In both cases,$f \propto v$,where $v$ is the speed of sound in the gas.The speed of sound in a gas is given by $v = \sqrt{\frac{\gamma RT}{M}}$,where $M$ is the molar mass of the gas.Since $T$ is constant,$v \propto \frac{1}{\sqrt{M}}$. Thus,$f \propto \frac{1}{\sqrt{M}}$.$(A)$ $M(H_2) = 2$,$M(O_2) = 32$. Since $M$ increases,$f$ decreases. Statement $(A)$ is incorrect.$(B)$ $M(O_2) = 32$,$M(N_2) = 28$. Since $M$ decreases,$f$ increases. Statement $(B)$ is correct.$(C)$ $M(He) = 4$,$M(CH_4) = 16$. Since $M$ increases,$f$ decreases. Statement $(C)$ is correct.Therefore,both $(B)$ and $(C)$ are correct.

$A$ gas is filled in an organ pipe and it is sounded in its fundamental mode. Choose the correct statement$(s)$ : ($T$ = constant)

Similar Questions

On closing an open organ pipe from one end, it is noticed that the frequency of the third harmonic is $50 \,Hz$ more than the fundamental frequency of vibration in the open organ pipe. The fundamental frequency of the open organ pipe is (in $\,Hz$)

The first overtone of the vibrating air column of a closed pipe has the same frequency as the second overtone of an open pipe $1.5 \ m$ long. The length of the closed pipe is (in $m$)

The vibrations of four air columns are shown below. The ratio of frequencies is

An open pipe of length $33 \, cm$ resonates to a frequency of $1000 \, Hz$. The mode of vibration is: (velocity of sound $= 330 \, m/s$)

The fundamental frequency of a closed pipe of length $L$ is equal to the second overtone of a pipe open at both the ends of length $(XL)$. The value of $X$ is (Neglect end correction).

Vedclass Test Series

Exam Paper Generator

Online Exam Module