$A$ load of $2 \,kg$ produces an extension of $1 \,mm$ in a wire of $3 \,m$ in length and $1 \,mm$ in diameter. The Young's modulus of the wire will be .......... $Nm^{-2}$.

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be:

$A$ $100\,m$ long wire having cross-sectional area $6.25 \times 10^{-4}\,m^2$ and Young's modulus $10^{10}\,N/m^2$ is subjected to a load of $250\,N$. The elongation in the wire will be:

Two wires $A$ and $B$ are made of the same material having a ratio of lengths $\frac{L_A}{L_B} = \frac{1}{3}$ and their diameters ratio $\frac{d_A}{d_B} = 2$. If both the wires are stretched using the same force,what would be the ratio of their respective elongations?

One end of a steel wire of radius $r$ is fixed to a ceiling and a load of $3 \ kg$ is attached to the free end of the wire. Another wire made of copper of radius $2r$ is attached to the bottom of the $3 \ kg$ load and a $2 \ kg$ load is attached to the free end of the copper wire. The ratio of longitudinal strains produced in copper and steel wires is (Young modulus of steel $= 20 \times 10^{10} \ Nm^{-2}$,Young modulus of copper $= 12 \times 10^{10} \ Nm^{-2}$)

The units of Young's modulus of elasticity are