A potential divider is used to give outputs o | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The circuit consists of three resistors $R_1, R_2, R_3$ connected in series across a $12\,V$ source.Let the current flowing through the circuit be

Vedclass · Accepted Answer

$1 : 1 : 1$

Vedclass · Answer

(B) The circuit consists of three resistors $R_1, R_2, R_3$ connected in series across a $12\,V$ source.Let the current flowing through the circuit be $I$.The voltage drops across the resistors are proportional to their resistances since $V = IR$.The potential at the bottom is $0\,V$.The potential at the junction of $R_1$ and $R_2$ is $4\,V$. Thus,the voltage drop across $R_1$ is $V_1 = 4\,V - 0\,V = 4\,V$.The potential at the junction of $R_2$ and $R_3$ is $8\,V$. Thus,the voltage drop across $R_2$ is $V_2 = 8\,V - 4\,V = 4\,V$.The potential at the top of $R_3$ is $12\,V$. Thus,the voltage drop across $R_3$ is $V_3 = 12\,V - 8\,V = 4\,V$.Since the current $I$ is the same for all resistors in series,and the voltage drops are equal $(V_1 = V_2 = V_3 = 4\,V)$,the resistances must be equal.Therefore,$R_1 = R_2 = R_3$,which gives the ratio $R_1 : R_2 : R_3 = 1 : 1 : 1$.

$A$ potential divider is used to give outputs of $4\,V$ and $8\,V$ from a $12\,V$ source. Which combination of resistances,$(R_1 : R_2 : R_3)$ gives the correct voltages?

Similar Questions

The potential difference across the terminals of the battery shown in the figure is .................... $V$. ($E = 10 \ V$,$r = 1 \ \Omega$,external resistance $R = 4 \ \Omega$) (in $V$)

For the network shown below, the value of $V_{B} - V_{A}$ is . . . . . . $V$.

The ammeter reading in the following circuit will be .............. $A$.

What is the reading of the voltmeter in the following figure (in $V$)?

Vedclass Test Series

Exam Paper Generator

Online Exam Module