$A$ rod of length $l$ with thermally insulated lateral surface is made of a material whose thermal conductivity $K$ varies as $K = C/T$,where $C$ is a constant. The ends are at temperatures $T_1$ and $T_2$. The heat current density is

Two identical rods $AC$ and $CB$ made of two different metals having thermal conductivities in the ratio $2:3$ are kept in contact with each other at the end $C$. $A$ is at $100^{\circ}C$ and $B$ is at $25^{\circ}C$. Then the junction $C$ is at: (in $^{\circ}C$)

$A$ conducting rod of length $1 \,m$ has an area of cross-section $10^{-3} \,m^2$. One end is immersed in boiling water $(100^{\circ} C)$ and the other end in ice $(0^{\circ} C)$. If the coefficient of thermal conductivity of the rod is $96 \,cal/(s \cdot m \cdot ^{\circ}C)$ and the latent heat of fusion for ice is $8 \times 10^4 \,cal/kg$,then the amount of ice that will melt in one minute is:

In the Ingen-Hauz's experiment,the wax melts up to lengths $10 \ cm$ and $25 \ cm$ on two identical rods of different materials. The ratio of thermal conductivities of the two materials is:

Two rods have thermal conductivities $K$ and $3K$ and lengths $1 \ cm$ and $2 \ cm$ respectively. Their cross-sectional areas are equal. They are joined in series as shown in the figure. If the temperatures of the outer ends of this composite rod are $0^{\circ}C$ and $100^{\circ}C$ respectively,find the junction temperature $\phi$ in $^{\circ}C$.

The rate of heat conduction through a cylindrical rod is $Q_1$. The temperatures at the ends of the rod are $T_1$ and $T_2$. If all the dimensions of the rod are doubled while keeping the temperatures the same,the new rate of heat conduction is $Q_2$. Then: