$A$ small square loop of wire of side $l$ is placed inside a large square loop of wire of side $(L > l)$. The loops are coplanar and their centres coincide. The mutual inductance of the system is proportional to

$A$ coil of radius $1\, cm$ and $100$ turns is placed in the middle of a long solenoid of radius $5\, cm$ having $5\, turns/cm$, with its axis parallel to the axis of the solenoid. The mutual inductance in millihenry is:

The mutual inductance of a system of two coils does not depend on . . . . . . .

$AB$ is an infinitely long wire placed in the plane of a rectangular coil $PQRS$ with dimensions as shown in the figure. Calculate the mutual inductance of wire $AB$ and coil $PQRS$.

An alternating current with an angular frequency of $\omega = 200\,rad/s$ and a peak value of $I_0 = 1\,A$,as shown in the figure,is applied to the primary coil of a transformer. If the coefficient of mutual induction between the primary and the secondary coils is $M = 1.5\,H$,the magnitude of the induced voltage in the secondary coil will be.....$V$.

Two coils $P$ and $Q$ are kept near each other. When no current flows through coil $P$ and current increases in coil $Q$ at the rate $10 \ A/s$,the emf in coil $P$ is $12 \ mV$. When coil $Q$ carries no current and current of $1.5 \ A$ flows through coil $P$,the magnetic flux linked with the coil $Q$ in $mWb$ is