$A$ soap film of surface tension $3 \times 10^{-2} \, N/m$ is formed in a rectangular frame and can support a straw. The length of the film is $10 \, cm$. The mass of the straw the film can support is ........ $g$.

What mass should be suspended from the wire $CD$ to keep it in equilibrium?

$A$ spherical body of density $\rho$ is floating half immersed in a liquid of density $d$. If $\sigma$ is the surface tension of the liquid,then the diameter of the body is

Consider a bowl filled with water on which some black pepper powder has been sprinkled uniformly. Now,a drop of liquid soap is added at the centre of the surface of water. The picture of the surface immediately after this will look like:

When liquid medicine of density $\rho$ is to be put in the eye, it is done with the help of a dropper. As the bulb on the top of the dropper is pressed, a drop forms at the opening of the dropper. We wish to estimate the size of the drop. We first assume that the drop formed at the opening is spherical because that requires a minimum increase in its surface energy. To determine the size, we calculate the net vertical force due to the surface tension $T$ when the radius of the drop is $R$. When the force becomes smaller than the weight of the drop, the drop gets detached from the dropper.
$1.$ If the radius of the opening of the dropper is $r$, the vertical force due to the surface tension on the drop of radius $R$ (assuming $r \ll R$) is
$(A)$ $2 \pi r T$ $(B)$ $2 \pi R T$ $(C)$ $\frac{2 \pi r^2 T}{R}$ $(D)$ $\frac{2 \pi R^2 T}{r}$
$2.$ If $r=5 \times 10^{-4} \, m, \rho=10^3 \, kg \, m^{-3}, g=10 \, m/s^2, T=0.11 \, Nm^{-1}$, the radius of the drop when it detaches from the dropper is approximately
$(A)$ $1.4 \times 10^{-3} \, m$ $(B)$ $3.3 \times 10^{-3} \, m$
$(C)$ $2.0 \times 10^{-3} \, m$ $(D)$ $4.1 \times 10^{-3} \, m$
$3.$ After the drop detaches, its surface energy is
$(A)$ $1.4 \times 10^{-6} \, J$ $(B)$ $2.7 \times 10^{-6} \, J$
$(C)$ $5.4 \times 10^{-6} \, J$ $(D)$ $8.1 \times 10^{-6} \, J$
Give the answer for questions $1, 2$ and $3.$

$A$ square frame of each side $L$ is dipped in a soap solution and taken out. The force acting on the film formed is ($T =$ surface tension of soap solution). (in $TL$)