A solar cell is to be fabricated for efficien | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) For a solar cell,the material $A$ must be able to absorb a significant portion of the solar spectrum. The band gap energy of $A$ should be around

Vedclass · Accepted Answer

$E_{A}=1.5 \, eV, E_{B}=5 \, eV$

Vedclass · Answer

(A) For a solar cell,the material $A$ must be able to absorb a significant portion of the solar spectrum. The band gap energy of $A$ should be around $1.5 \, eV$ to efficiently convert solar radiation into electrical energy (emf).Material $B$ is used as a protective coating. To ensure that solar radiation passes through this coating without being absorbed,the band gap energy $E_{B}$ of material $B$ must be significantly larger than the energy of the incident photons. Therefore,a large band gap like $E_{B} = 5 \, eV$ is ideal for material $B$ to remain transparent to the solar spectrum.Thus,the optimum choice is $E_{A} = 1.5 \, eV$ and $E_{B} = 5 \, eV$.

Similar Questions

$A$ red $LED$ emits light at $0.1 \ W$ uniformly in all directions. The amplitude of the electric field of the light at a distance of $1 \ m$ from the diode is.... $V \ m^{-1}$

To measure light intensity,we use:

Which of the following statements is $NOT$ correct in the case of an $LED$?

$(i)$ Name the type of diode whose characteristics are shown in figure $(a)$ and figure $(b)$.
$(ii)$ What does the point $P$ in figure $(a)$ represent?
$(iii)$ What do the points $P$ and $Q$ in figure $(b)$ represent?

The schematic symbol of a light emitting diode $(LED)$ is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module