$A$ square metallic wire loop of side $0.1 \, m$ and resistance $1 \, \Omega$ is moved with a constant velocity in a magnetic field of $2 \, Wb/m^2$ as shown in the figure. The magnetic field is perpendicular to the plane of the loop, and the loop is connected to a network of resistances. What should be the velocity of the loop to have a steady current of $1 \, mA$ in the loop? (in $cm/sec$)

$A$ wire of length $1\,m$ is moving with a velocity of $8\,m/s$ at right angles to a magnetic field of $2\,T$. The magnitude of the induced emf between the ends of the wire will be $............\,V$.

In an $AC$ generator, if a coil of $N$ turns and area $A$ is rotated at $v$ revolutions per second in a uniform magnetic field $B$, then the motional $EMF$ produced is equal to (At $t=0$ $s$, the coil is perpendicular to the field).

$A$ conducting rod $PQ$ of length $1 \ m$ is moving with a uniform speed $2 \ ms^{-1}$ in a uniform magnetic field of $4 \ T$ which is directed into the paper. $A$ capacitor of capacity $10 \ \mu F$ is connected as shown in the figure. Then,the charge on the plates of the capacitor are

What is motional $emf$?

$A$ circular coil of radius $8.0\; cm$ and $20$ turns is rotated about its vertical diameter with an angular speed of $50\; rad \;s^{-1}$ in a uniform horizontal magnetic field of magnitude $3.0 \times 10^{-2}\; T$. Obtain the maximum and average $emf$ induced in the coil. If the coil forms a closed loop of resistance $10\; \Omega,$ calculate the maximum value of current in the coil. Calculate the average power loss due to Joule heating. Where does this power come from?