$A$ tangential force $F$ is applied on a disc of radius $R$,due to which it deflects through an angle $\theta$ from its initial position. The work done by this force would be

When $12000 \ J$ of work is done on a flywheel,its frequency of rotation increases from $10 \ Hz$ to $20 \ Hz$. The moment of inertia of the flywheel about its axis of rotation is (take $\pi^2=10$):

$A$ disc is rotating with angular velocity $\vec{\omega}$. $A$ force $\vec{F}$ acts at a point whose position vector with respect to the axis of rotation is $\vec{r}$. The power associated with the torque due to the force is given by ..........

$A$ disc of mass $1\,kg$ and radius $R$ is free to rotate about a horizontal axis passing through its centre and perpendicular to the plane of the disc. $A$ body of the same mass as that of the disc is fixed at the highest point of the disc. Now the system is released. When the body comes to the lowest position,its angular speed will be $4 \sqrt{\frac{x}{3 R}} \text{ rad s}^{-1}$ where $x=$ (Given $g = 10 \text{ m s}^{-2}$)

$A$ thin rod of length $L$ and mass $M$ is held vertically with one end on the floor and is allowed to fall. Find the velocity of the other end when it hits the floor,assuming that the end on the floor does not slip.

$A$ cord of negligible mass is wound around the rim of a wheel supported by spokes with negligible mass. The mass of the wheel is $10 \ kg$ and the radius is $10 \ cm$. It can rotate freely without any friction. Initially,the wheel is at rest. If a steady pull of $20 \ N$ is applied on the cord,the angular velocity (in $rad/s$) of the wheel,after the cord is unwound by $1 \ m$,would be: