$A$ travelling microscope has $20$ divisions per $cm$ on the main scale while its Vernier scale has total $50$ divisions and $25$ Vernier scale divisions are equal to $24$ main scale divisions. What is the least count of the travelling microscope in $cm$?

$A$ spectrometer gives the following reading when used to measure the angle of a prism.
Main scale reading : $58.5^{\circ}$
Vernier scale reading : $09$ divisions
Given that $1$ division on the main scale corresponds to $0.5^{\circ}$. The total number of divisions on the Vernier scale is $30$,which matches $29$ divisions of the main scale. The angle of the prism from the above data is ....... . (in $^{\circ}$)

$A$ plano-convex lens of unknown material and unknown focal length is given. With the help of a Spherometer,we can measure the,

Figure $1$ shows the configuration of the main scale and Vernier scale before measurement. Figure $2$ shows the configuration corresponding to the measurement of the diameter $D$ of a tube. The measured value of $D$ is (in $cm$)

In a vernier callipers,each $cm$ on the main scale is divided into $20$ equal parts. If the $10^{th}$ vernier scale division coincides with the $9^{th}$ main scale division,then the value of the vernier constant will be $\dots \; \times 10^{-2} \; mm$.

$A$ student measured the diameter of a small steel ball using a screw gauge of least count $0.001 \, cm$. The main scale reading is $5 \, mm$ and the circular scale division coinciding with the reference level is $25$. If the screw gauge has a zero error of $-0.004 \, cm$,the correct diameter of the ball is: (in $, cm$)