$A$ triangular loop of side $l$ carries a current $I$. It is placed in a magnetic field $B$ such that the plane of the loop is in the direction of $B$. The torque on the loop is

$A$ circular loop of radius $R$ carries a current $I$. Another circular loop of radius $r (r \ll R)$ carries a current $i$ and is placed at the centre of the larger loop. The planes of the two circles are at right angles to each other. Find the torque acting on the smaller loop.

$A$ uniform current-carrying ring of mass $m$ and radius $R$ is suspended by a massless string as shown. $A$ uniform magnetic field $B_0$ exists in the region to keep the ring in a horizontal position. Determine the current $I$ in the ring.

$A$ small coil $C$ with $N = 200$ turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in the figure. The cross-sectional area of the coil is $A = 1.0 \, cm^2$,and the length of the arm $OA$ of the balance beam is $l = 30 \, cm$. When there is no current in the coil,the balance is in equilibrium. On passing a current $I = 22 \, mA$ through the coil,the equilibrium is restored by putting an additional counterweight of mass $\Delta m = 60 \, mg$ on the balance pan. Find the magnetic induction $B$ at the spot where the coil is located. (in $, T$)

$A$ uniform magnetic field of $0.3 \text{ T}$ is established along the $+z$-direction. $A$ rectangular loop of sides $10 \text{ cm}$ and $5 \text{ cm}$ carries a current of $12 \text{ A}$ and is placed in the $xy$-plane as shown in the figure. The torque acting on the loop is $....... \text{ Nm}$.

$A$ rectangular conducting loop consists of two wires on two opposite sides of length $l$ joined together by rods of length $d$. The wires are each of the same material but with cross-sections differing by a factor of $2$. The thicker wire has a resistance $R$ and the rods are of low resistance,which in turn are connected to a constant voltage source $V_{0}$. The loop is placed in a uniform magnetic field $\vec{B}$ at $45^{\circ}$ to its plane. Find the torque exerted by the magnetic field on the loop about an axis through the centers of the rods.