A vertical hanging bar of length l and mass m | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top s

Vedclass · Accepted Answer

$\frac{Mg + mg(l-x)}{A}$

Vedclass · Answer

(B) Tensile stress is defined as the ratio of the tension force at a point to the cross-sectional area $A$ of the bar.At a distance $x$ from the top support,the tension in the bar is equal to the total weight acting below that point.The length of the bar below the point at distance $x$ is $(l-x)$.The mass of this portion of the bar is $m 	imes (l-x)$.The weight of this portion is $mg(l-x)$.The load $M$ at the bottom also contributes to the tension,with a weight of $Mg$.Therefore,the total tension $T$ at distance $x$ is $T = Mg + mg(l-x)$.The tensile stress $\sigma$ is given by $\sigma = \frac{T}{A} = \frac{Mg + mg(l-x)}{A}$.

$A$ vertical hanging bar of length $l$ and mass $m$ per unit length carries a load of mass $M$ at its lower end. Its upper end is clamped to a rigid support. The tensile stress at a distance $x$ from the support is (where $A$ is the area of cross-section of the bar):

Similar Questions

$A$ force $F$ is needed to break a copper wire having radius $R$. The force needed to break a copper wire of radius $2R$ will be

The spring balance does not read properly after its long use,because

The value of tension in a long thin metal wire has been changed from $T_{1}$ to $T_{2}$. The lengths of the metal wire at two different values of tension $T_{1}$ and $T_{2}$ are $l_{1}$ and $l_{2}$ respectively. The actual length of the metal wire is:

Hooke's law defines:

Vedclass Test Series

Exam Paper Generator

Online Exam Module