$A$ voltmeter of resistance $1000\,\Omega$ gives full scale deflection when a current of $100\,mA$ flows through it. The shunt resistance required across it to enable it to be used as an ammeter reading $1\,A$ at full scale deflection is ............... $\Omega$.

The number of turns of the coil of a moving coil galvanometer is increased in order to increase current sensitivity by $50 \%$. The percentage change in voltage sensitivity of the galvanometer will be $..........\%$

$A$ galvanometer of resistance $50\, \Omega$ is connected to a battery of $3\, V$ along with a resistance of $2950\, \Omega$ in series. $A$ full-scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $20$ divisions,the resistance in series should be.......$\Omega$

$A$ galvanometer of resistance $50 \Omega$ is connected to a battery of $3 \text{ V}$ along with a resistance of $2950 \Omega$ in series. $A$ full-scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $20$ divisions,the resistance in series should be: (in $\Omega$)

$A$ galvanometer of resistance $20 \Omega$ gives a deflection of $5$ divisions when $1 \text{ mA}$ current flows through it. The galvanometer scale has $50$ divisions. To convert the galvanometer into a voltmeter of range $25 \text{ V}$,we should connect a resistance of

Only $4 \%$ of the total current in the circuit passes through a galvanometer. If the resistance of the galvanometer is $G$,then the shunt resistance connected to the galvanometer is: