$A$ wire frame $PQRSTU$ is moving horizontally with velocity $v$ in a uniform magnetic field $B$ acting perpendicular to its plane as shown in the figure. Choose the $INCORRECT$ statement.

  • A
    the magnitude of induced emf between $P$ and $Q$ is $Bv\left( \frac{2L}{3} \right)$
  • B
    the magnitude of induced emf between $P$ and $Q$ is $Bv\left( \frac{L}{3} \right)$
  • C
    The electric field in the portion $RS$ of wire is non-zero
  • D
    The electric field in the portion $QP$ of wire is non-zero

Explore More

Similar Questions

$A$ long straight wire carries a current,$I = 2 \text{ A}$. $A$ semi-circular conducting rod is placed beside it on two conducting parallel rails of negligible resistance. Both the rails are parallel to the wire. The wire,the rod,and the rails lie in the same horizontal plane,as shown in the figure. Two ends of the semi-circular rod are at distances $1 \text{ cm}$ and $4 \text{ cm}$ from the wire. At time $t = 0$,the rod starts moving on the rails with a speed $v = 3.0 \text{ m/s}$. $A$ resistor $R = 1.4 \text{ } \Omega$ and a capacitor $C_0 = 5.0 \text{ } \mu\text{F}$ are connected in series between the rails. At time $t = 0$,$C_0$ is uncharged. Which of the following statement$(s)$ is(are) correct? $\left[\mu_0 = 4\pi \times 10^{-7} \text{ SI units}, \ln 2 = 0.7\right]$
$(A)$ Maximum current through $R$ is $1.2 \times 10^{-6} \text{ A}$
$(B)$ Maximum current through $R$ is $3.8 \times 10^{-6} \text{ A}$
$(C)$ Maximum charge on capacitor $C_0$ is $8.4 \times 10^{-12} \text{ C}$
$(D)$ Maximum charge on capacitor $C_0$ is $2.4 \times 10^{-12} \text{ C}$

$A$ conductor wire $ABCDE$ with each arm $10 \ cm$ in length is placed in a magnetic field of $\frac{1}{\sqrt{2}} \ T$,perpendicular to its plane. When the conductor is pulled towards the right with a constant velocity of $10 \ cm/s$,the induced emf between points $A$ and $E$ is . . . . . . $mV$.

$A$ metallic rod of length '$L$' is rotated with an angular speed of '$\omega$' normal to a uniform magnetic field '$B$' about an axis passing through one end of the rod,as shown in the figure. The induced emf will be:

$A$ rectangular conducting loop of sides $8\, cm$ and $2\, cm$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3\, T$ directed normal to the loop as shown in figures $(i)$ and $(ii)$. If the velocity of the loop is $1\, cm\, s^{-1}$,then the ratio of the voltage developed across $ab$ in case $(i)$ to case $(ii)$ is:

$A$ circular coil of radius $8.0\; cm$ and $20$ turns is rotated about its vertical diameter with an angular speed of $50\; rad \;s^{-1}$ in a uniform horizontal magnetic field of magnitude $3.0 \times 10^{-2}\; T$. Obtain the maximum and average $emf$ induced in the coil. If the coil forms a closed loop of resistance $10\; \Omega,$ calculate the maximum value of current in the coil. Calculate the average power loss due to Joule heating. Where does this power come from?

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo