An e.m.f. E = E_0 cos omega t is applied to a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The average power consumed in an $AC$ circuit is given by $P = E_{rms} I_{rms} \cos \phi$. Here,the power factor is $\cos \phi = \frac{R}{Z}$. The

Vedclass · Accepted Answer

$\frac{E_0^2}{4 R}$

Vedclass · Answer

(C) The average power consumed in an $AC$ circuit is given by $P = E_{rms} I_{rms} \cos \phi$. Here,the power factor is $\cos \phi = \frac{R}{Z}$. The $rms$ current is $I_{rms} = \frac{E_{rms}}{Z} = \frac{E_0}{\sqrt{2} Z}$. Substituting these into the power formula: $P = \left( \frac{E_0}{\sqrt{2}} \right) \left( \frac{E_0}{\sqrt{2} Z} \right) \left( \frac{R}{Z} \right) = \frac{E_0^2 R}{2 Z^2} \dots (i)$. Given that the inductive reactance $X_L = R$,the impedance $Z$ of the $L-R$ circuit is: $Z = \sqrt{R^2 + X_L^2} = \sqrt{R^2 + R^2} = \sqrt{2} R$. Substituting $Z^2 = 2 R^2$ into equation $(i)$: $P = \frac{E_0^2 R}{2 (2 R^2)} = \frac{E_0^2 R}{4 R^2} = \frac{E_0^2}{4 R}$.

An e.m.f. $E = E_0 \cos \omega t$ is applied to an $L-R$ circuit. The inductive reactance is equal to the resistance $R$ of the circuit. The power consumed in the circuit is:

Similar Questions

$A$ capacitor of capacitance $100 \mu F$ and a coil of resistance $20 \Omega$ and inductance $12.5 mH$ are connected in series with a $220 V, \frac{200}{\pi} Hz$ $AC$ source. The maximum value of instantaneous current in the circuit is (in $A$)

$A$ coil has a resistance of $30\,\Omega$ and an inductive reactance of $20\,\Omega$ at a frequency of $50\,Hz$. If an $AC$ source of $200\,V$ and $100\,Hz$ is connected across the coil,the current in the coil will be.......$A$

If $L$ and $R$ are respectively the inductance and resistance,then the dimensions of $\frac{R}{L}$ will be

$A$ circuit connected to an $ac$ source of $emf$ $e = e_0 \sin(1000t)$,where $t$ is in seconds,exhibits a phase difference of $\frac{\pi}{4}$ between the $emf$ $e$ and current $i$. Which of the following circuits will exhibit this?

What will be the reading in the voltmeter and ammeter of the circuit shown?

Vedclass Test Series

Exam Paper Generator

Online Exam Module