Before the saturation state of a diode,at plate voltages of $400 \, V$ and $200 \, V$,the currents are $i_1$ and $i_2$ respectively. The ratio $i_1/i_2$ will be:

The value of plate current $I_P$ in the given circuit diagram will be in $mA$.

In the grid circuit of a triode, an input voltage $E = 2\sqrt{2} \cos \omega t$ is applied. If the amplification factor $\mu = 14$ and the plate resistance $r_p = 10 \text{ k}\Omega$, find the $r.m.s.$ current flowing through the load resistance $R_L = 12 \text{ k}\Omega$ in $\text{mA}$.

The figure represents the variation of triode parameters ($\mu$, $r_p$, or $g_m$) with the plate current. The correct variations of $\mu$ and $r_p$ are given, respectively, by the curves:

The plate current $i_p$ in a triode valve is given by $i_p = K(V_p + \mu V_g)^{3/2}$,where $i_p$ is in $mA$ and $V_p$ and $V_g$ are in $V$. If $r_p = 10^4 \, \Omega$ and $g_m = 5 \times 10^{-3} \, \text{mho}$,then for $i_p = 8 \, mA$ and $V_p = 300 \, V$,what are the values of $K$ and the grid cut-off voltage?

Which of the following does not vary with plate or grid voltages in a vacuum triode?