Fill in the blanks:
$(a)$ The volume of a cube of side $1\; cm$ is equal to $\ldots \ldots\, m ^{3}$
$(b)$ The surface area of a solid cylinder of radius $2.0 \;cm$ and height $10.0\; cm$ is equal to $\ldots(mm)^{2}$
$(c)$ $A$ vehicle moving with a speed of $18\; km\, h ^{-1}$ covers $\ldots ..m$ in $1\; s$
$(d)$ The relative density of lead is $11.3$. Its density is $\ldots ..\, g\, cm ^{-3}$ or $\ldots . .\, kg\, m ^{-3}$.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(N/A) Since $1\; cm = 10^{-2}\; m$,the volume of a cube of side $1\; cm$ is $(10^{-2}\; m)^{3} = 10^{-6}\; m^{3}$.
$(b)$ The total surface area of a cylinder is $S = 2\pi r(r + h)$. Given $r = 2.0\; cm = 20\; mm$ and $h = 10.0\; cm = 100\; mm$. Thus,$S = 2 \times 3.14 \times 20\; mm \times (20\; mm + 100\; mm) = 2 \times 3.14 \times 20 \times 120\; mm^{2} = 1.5072 \times 10^{4}\; mm^{2}$.
$(c)$ Speed $= 18\; km/h = 18 \times (5/18)\; m/s = 5\; m/s$. Distance covered in $1\; s$ is $5\; m/s \times 1\; s = 5\; m$.
$(d)$ Relative density is the ratio of the density of a substance to the density of water $(1\; g/cm^{3})$. Thus,density of lead $= 11.3 \times 1\; g/cm^{3} = 11.3\; g/cm^{3}$. Since $1\; g/cm^{3} = 10^{3}\; kg/m^{3}$,the density is $11.3 \times 10^{3}\; kg/m^{3}$.

Explore More

Similar Questions

The speed of light in vacuum is taken as unity. If light takes $6 \text{ min } 40 \text{ s}$ to reach the Earth from the Sun, the distance between the Sun and the Earth in new units is:

Match List-$I$ with List-$II$.
List-$I$ List-$II$
$(A)$ Torque $(I)$ $kg\,m^{-1}\,s^{-2}$
$(B)$ Energy density $(II)$ $kg\,m\,s^{-1}$
$(C)$ Pressure gradient $(III)$ $kg\,m^{-2}\,s^{-2}$
$(D)$ Impulse $(IV)$ $kg\,m^2\,s^{-2}$

Choose the correct answer from the options given below:

Choose the correct match:
List-$I$ List-$II$
$(i)$ Curie $(A)$ $MLT^{-2}$
$(ii)$ Light year $(B)$ $M$
$(iii)$ Dielectric strength $(C)$ Dimensionless
$(iv)$ Atomic weight $(D)$ $T$
$(v)$ Decibel $(E)$ $ML^2T^{-2}$
$(F)$ $MT^{-3}$
$(G)$ $T^{-1}$
$(H)$ $L$
$(I)$ $MLT^{-3}I^{-1}$
$(J)$ $LT^{-1}$

$Assertion$: In the measurement of physical quantities,direct and indirect methods are used.
$Reason$: The accuracy and precision of measuring instruments,along with errors in measurements,should be taken into account while expressing the result.

The diameter of a wire measured by a screw gauge of least count $0.001 \text{ cm}$ is $0.08 \text{ cm}$. The length measured by a scale of least count $0.1 \text{ cm}$ is $150 \text{ cm}$. When a weight of $100 \text{ N}$ is applied to the wire, the extension in length is $0.5 \text{ cm}$, measured by a micrometer of least count $0.001 \text{ cm}$. The error in the measured Young's modulus is $\alpha \times 10^9 \text{ N/m}^2$. The value of $\alpha$ is . . . . . . . (Ignore the contribution of the load to Young's modulus error calculation)

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo