Five conducting parallel plates having area $A$ and separation between them $d$ are placed as shown in the figure. Plate number $2$ and $4$ are connected by a wire,and between point $A$ and $B$,a cell of emf $E$ is connected. The charge flown through the cell is

$A$ parallel plate capacitor is to be designed,using a dielectric of dielectric constant $5$,so as to have a dielectric strength of $10^9 \; Vm^{-1}$. If the voltage rating of the capacitor is $12 \; kV$,the minimum area of each plate required to have a capacitance of $80 \; pF$ is

The lower plate of a parallel plate capacitor is supported on a rigid rod. The upper plate is suspended from one end of a balance. The two plates are joined together by a thin wire and subsequently disconnected. The balance is then counterpoised. Now a voltage $V = 5000 \, V$ is applied between the plates. The distance between the plates is $d = 5 \, mm$ and the area of each plate is $A = 100 \, cm^2$. Find the additional mass $m$ (in grams) placed to maintain balance. [All elements other than plates are massless and nonconducting. Take $\epsilon_0 = 8.85 \times 10^{-12} \, F/m$ and $g = 9.8 \, m/s^2$].

Two charged capacitors have their outer plates fixed and inner plates connected by a spring of force constant $k$. The charge on each capacitor is $q$. Find the extension in the spring at equilibrium.

Four metallic plates,each with a surface area of one side $A$,are placed at a distance $d$ from each other. The plates are connected as shown in the circuit diagram. Then the capacitance of the system between $a$ and $b$ is

The area of each plate of a parallel plate capacitor is $20 \, cm^2$ and the separation between the plates is $2 \, mm$. If the dielectric strength of air is $3 \times 10^6 \, V/m$,the maximum possible value of the emf of the battery that can be connected across the plates of this capacitor and the corresponding charge on the plates are: