Given in the figure are two blocks $A$ and $B$ of weight $20\ N$ and $100\ N,$ respectively. These are being pressed against a wall by a force $F$ as shown. If the coefficient of friction between the blocks is $0.1$ and between block $B$ and the wall is $0.15$,the frictional force applied by the wall on block $B$ is ........... $N$.

$A$ force of $36 \, \text{dyne}$ acts on a body placed on an inclined plane making an angle of $60^{\circ}$ with the horizontal. If the mass of the body is $18 \, \text{g}$,what is the acceleration of the body in the horizontal direction?

Three forces $F_1=10\,N$,$F_2=8\,N$,and $F_3=6\,N$ are acting on a particle of mass $5\,kg$. The forces $F_2$ and $F_3$ are applied perpendicular to each other such that the particle remains at rest. If the force $F_1$ is removed,then the acceleration of the particle is $......\,m/s^2$.

One end of a spring of force constant $150 \text{ dyne cm}^{-1}$ is connected to a block of mass $0.2 \text{ kg}$ kept on a rough horizontal surface of coefficient of friction $0.3$. The other end of the spring is connected to a rigid support as shown in the figure and the spring is initially undeformed. The maximum velocity $v$ that can be given to the block so that it travels only in one direction is . . . . . . $\text{ms}^{-1}$. (Acceleration due to gravity $= 10 \text{ ms}^{-2}$)

The masses of blocks $A$ and $B$ are $100 \, kg$ and $200 \, kg$ respectively. The coefficient of friction between $A$ and $B$ is $0.2$,and the coefficient of friction between $B$ and the ground is $0.3$. What force $F$ (in $N$) must be applied to block $B$ to make it move?

$A$ uniform cylinder rests on a cart as shown. The coefficient of static friction between the cylinder and the cart is $0.5$. If the cylinder is $4\, cm$ in diameter and $10\, cm$ in height,which of the following is the minimum acceleration of the cart needed to cause the cylinder to tip over? (Assume $g = 10\, m/s^2$)