If the B-H curves of two samples of P and Q o | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) For a permanent magnet,we require a material with high retentivity (to ensure a strong magnetic field) and high coercivity (so that the magnetizat

Vedclass · Accepted Answer

$P$ is suitable for making permanent magnets and $Q$ for making electromagnets.

Vedclass · Answer

(B) For a permanent magnet,we require a material with high retentivity (to ensure a strong magnetic field) and high coercivity (so that the magnetization is not easily wiped out by external fields or temperature changes).For an electromagnet,we require a material with high permeability,high saturation magnetization,and low coercivity (so that it can be easily magnetized and demagnetized) along with a small hysteresis loop area (to minimize energy loss during magnetization cycles).Comparing the given $B-H$ curves,sample $P$ has a wider hysteresis loop,indicating higher retentivity and higher coercivity,making it suitable for permanent magnets.Sample $Q$ has a narrower hysteresis loop,indicating lower coercivity and lower energy loss,making it suitable for electromagnets.Therefore,$P$ is suitable for making permanent magnets and $Q$ is suitable for making electromagnets.

If the $B-H$ curves of two samples of $P$ and $Q$ of iron are as shown below,then which one of the following statements is $CORRECT$?

Similar Questions

The coercivity of a magnet is $5 \times 10^3 \text{ A/m}$. The amount of current required to be passed in a solenoid of length $30 \text{ cm}$ and the number of turns $150$,so that the magnet gets demagnetized when placed inside the solenoid is ............. $A$.

The coercivity of a small magnet is $4 \times 10^3 \ A/m$. It is placed inside a solenoid of length $1 \ m$ having $500$ turns to demagnetize it. The current that must be passed through the solenoid is .......... $A$.

The area of the $B-H$ hysteresis loop is an indication of the

The energy dissipated per unit volume per cycle in the hysteresis of an iron sample of mass $10 \, kg$ is $200 \, J \, m^{-3} \, cycle^{-1}$. The density of iron is $7500 \, kg \, m^{-3}$. The loss of energy per hour at $50 \, cycle \, s^{-1}$ is: (in $J$)

Draw the hysteresis curve ($B-H$ loop) and explain it.

Vedclass Test Series

Exam Paper Generator

Online Exam Module