If the following input signal is sent through | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The circuit acts as a half-wave rectifier. When the input voltage is $+10 V$,the $P$-terminal of the diode is at a higher potential than the $N$-t

Vedclass · Accepted Answer

Vedclass · Answer

(C) The circuit acts as a half-wave rectifier. When the input voltage is $+10 V$,the $P$-terminal of the diode is at a higher potential than the $N$-terminal,making the diode forward-biased. In this state,the diode conducts,and the output voltage across $R_L$ is $+10 V$. When the input voltage is $-10 V$,the $P$-terminal is at a lower potential than the $N$-terminal,making the diode reverse-biased. In this state,the diode does not conduct,and the output voltage across $R_L$ is $0 V$. Therefore,the output signal is a pulse that remains at $+10 V$ when the input is $+10 V$ and drops to $0 V$ when the input is $-10 V$.

If the following input signal is sent through a $PN$-junction diode,then the output signal across $R_L$ will be:

Similar Questions

For a half-wave rectifier, the load resistance is $R_L = 2 \, k\Omega$ and the $P-N$ junction diode resistance is $R_d = 2 \, k\Omega$. The rectification efficiency is .... $\%$.

$A$ sinusoidal voltage of peak value $200 \ V$ is connected to a diode and resistor $R$ in the circuit shown so that half-wave rectification occurs. If the forward resistance of the diode is negligible compared to $R$,the rms voltage (in volt) across $R$ is approximately:

In the half-wave rectifier circuit shown,which one of the following waveforms is true for $V_{CD}$,the output across $C$ and $D$?

$A$ half-wave rectifier is used to supply $100 \, V$ $dc$ to a load of $800 \, \Omega$. The diode resistance is $200 \, \Omega$. The $ac$ voltage required is :.......$V$

$A$ diode is used as a/an

Vedclass Test Series

Exam Paper Generator

Online Exam Module