If the ratio of diameters,lengths and Young's | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Young's modulus is given by $Y = \frac{F L}{A \Delta L} = \frac{4 F L}{\pi D^2 \Delta L}$,where $F$ is the force,$L$ is the length,$A$ is the cros

Vedclass · Accepted Answer

$\frac{5q}{3p^2r}$

Vedclass · Answer

(B) Young's modulus is given by $Y = \frac{F L}{A \Delta L} = \frac{4 F L}{\pi D^2 \Delta L}$,where $F$ is the force,$L$ is the length,$A$ is the cross-sectional area,$D$ is the diameter,and $\Delta L$ is the change in length.Rearranging for the change in length,we get $\Delta L = \frac{4 F L}{\pi D^2 Y}$.For the steel wire,the tension $F_S = (2m + 3m)g = 5mg$. For the brass wire,the tension $F_B = 3mg$.Given ratios: $\frac{D_S}{D_B} = p$,$\frac{L_S}{L_B} = q$,and $\frac{Y_S}{Y_B} = r$.The ratio of the increase in lengths is:$\frac{\Delta L_S}{\Delta L_B} = \left( \frac{F_S}{F_B} \right) \left( \frac{L_S}{L_B} \right) \left( \frac{D_B^2}{D_S^2} \right) \left( \frac{Y_B}{Y_S} \right)$Substituting the given values:$\frac{\Delta L_S}{\Delta L_B} = \left( \frac{5mg}{3mg} \right) (q) \left( \frac{1}{p^2} \right) \left( \frac{1}{r} \right) = \frac{5q}{3p^2r}$.

If the ratio of diameters,lengths and Young's moduli of steel and brass wires shown in the figure are $p, q$ and $r$ respectively,then the corresponding ratio of increase in their lengths would be

Similar Questions

The figure shows a system of logic gates. From the study of the truth table,it can be found that to produce a high output $(1)$ at $R$,we must have

The threshold wavelength of tungsten is $2300 \, \mathring{A}$. If ultraviolet light of wavelength $1800 \, \mathring{A}$ is incident on it,then the maximum kinetic energy of photoelectrons would be about ............ $eV$.

The coefficient of thermal conductivity of copper is nine times that of steel. In the composite cylindrical bar shown in the figure,what will be the temperature at the junction of copper and steel in $^oC$?

If the lines $4x + 3y - 1 = 0$,$x - y + 5 = 0$,and $kx + 5y - 3 = 0$ are concurrent,then $k$ is equal to:

This is the $1^{st}$ and $2^{nd}$ exam question.

Vedclass Test Series

Exam Paper Generator

Online Exam Module