In the figure,two blocks $M$ and $m$ are tied together with an inextensible and light string. The mass $M$ is placed on a rough horizontal surface with coefficient of friction $\mu$ and the mass $m$ is hanging vertically against a smooth vertical wall. The pulley is frictionless. Choose the correct statement$(s)$ related to the tension $T$ in the string.

In the following problem,indicate the correct direction of the friction force acting on the cylinder,which is pulled on a rough surface by a constant force $F$. $A$ spool is pulled horizontally by a constant force $F$ applied below the center of mass. Which of the following diagrams correctly shows the direction of the friction force?

$A$ plank with a box on it at one end is gradually raised about the other end. As the angle of inclination with the horizontal reaches $30^o$,the box starts to slip and slides $4.0\, m$ down the plank in $4.0\, s$. The coefficients of static and kinetic friction between the box and the plank will be,respectively:

$A$ $1\; kg$ block situated on a rough incline is connected to a spring of spring constant $100\; N m^{-1}$ as shown in the figure. The block is released from rest with the spring in the unstretched position. The block moves $10\; cm$ down the incline before coming to rest. Find the coefficient of friction between the block and the incline. Assume that the spring has a negligible mass and the pulley is frictionless.

$A$ ball rests upon a flat piece of paper on a table top. The paper is pulled horizontally but quickly towards the right as shown. Relative to its initial position with respect to the table,the ball:
$(A)$ Remains stationary if there is no friction between the paper and the ball.
$(B)$ Moves to the left and starts rolling backwards,$i.e.$,to the left if there is friction between the paper and the ball.
$(C)$ Moves forward,$i.e.$,in the direction in which the paper is pulled.
Which of the following statements is/are correct?

$A$ balloon of mass $m$ is descending down with an acceleration $\frac{g}{2}$. How much mass should be removed from it so that it starts moving up with the same acceleration?