Prove that the velocity $v$ of translation of a rolling body (like a ring,disc,cylinder,or sphere) at the bottom of an inclined plane of height $h$ is given by $v^{2} = \frac{2gh}{1 + k^{2}/R^{2}}$ using dynamical considerations (i.e.,by considering forces and torques). Note: $k$ is the radius of gyration of the body about its symmetry axis,and $R$ is the radius of the body. The body starts from rest at the top of the plane.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(N/A) Let a body of mass $m$,radius $R$,and radius of gyration $k$ roll down an inclined plane of angle $\theta$ and height $h$.
$1$. Forces acting on the body:
- Component of weight $mg \sin \theta$ acting down the plane.
- Friction force $f$ acting up the plane.
- Normal force $N$ perpendicular to the plane.
$2$. Equations of motion:
- For translational motion: $mg \sin \theta - f = ma$ (where $a$ is linear acceleration).
- For rotational motion about the center of mass: $\tau = I\alpha = fR$,where $I = mk^{2}$ and $\alpha = a/R$.
- Thus,$fR = (mk^{2})(a/R) \implies f = mk^{2}a/R^{2}$.
$3$. Solving for acceleration $a$:
- Substitute $f$ into the translational equation: $mg \sin \theta - mk^{2}a/R^{2} = ma$.
- $mg \sin \theta = ma(1 + k^{2}/R^{2}) \implies a = \frac{g \sin \theta}{1 + k^{2}/R^{2}}$.
$4$. Finding velocity $v$:
- Using $v^{2} = u^{2} + 2as$,where $u = 0$ and $s = h/\sin \theta$:
- $v^{2} = 2 \left( \frac{g \sin \theta}{1 + k^{2}/R^{2}} \right) \left( \frac{h}{\sin \theta} \right)$.
- $v^{2} = \frac{2gh}{1 + k^{2}/R^{2}}$.
Thus,the result is proved.

Explore More

Similar Questions

$A$ solid sphere of mass $M$ and radius $R$ is rolling down an inclined plane of length $L$ and height $h$ without slipping. What will be the velocity of its center of mass upon reaching the bottom?

Difficult
View Solution

$A$ cylinder and a ring of same mass $M$ and radius $R$ are placed on the top of a rough inclined plane of inclination $\theta$. Both are released simultaneously from the same height $h$. When these bodies roll down to the foot of the inclined plane,then

Difficult
View Solution

The following bodies are made to roll up (without slipping) the same inclined plane from a horizontal place: $(i)$ a ring of radius $R$,$(ii)$ a solid cylinder of radius $\frac{R}{2}$,and $(iii)$ a solid sphere of radius $\frac{R}{4}$. If,in each case,the speed of the center of mass at the bottom of the incline is the same,the ratio of the maximum heights they climb is:

$A$ cylinder is pure rolling up an incline plane. It stops momentarily and then rolls back. The force of friction

$A$ cylinder of mass $10 \; kg$ and radius $15 \; cm$ is rolling perfectly on a plane of inclination $30^{\circ}$. The coefficient of static friction $\mu_{S} = 0.25$.
$(a)$ How much is the force of friction acting on the cylinder?
$(b)$ What is the work done against friction during rolling?
$(c)$ If the inclination $\theta$ of the plane is increased,at what value of $\theta$ does the cylinder begin to skid and not roll perfectly?

Difficult
View Solution

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo