The diagram below shows a hydraulic lift. A f | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) According to Pascal's law,the pressure applied to an enclosed fluid is transmitted undiminished to every portion of the fluid and to the walls of

Vedclass · Accepted Answer

The force at side $1$ is less than the force at side $2$

Vedclass · Answer

(B) According to Pascal's law,the pressure applied to an enclosed fluid is transmitted undiminished to every portion of the fluid and to the walls of the containing vessel.For a hydraulic lift,the pressure at both sides must be equal:$P_1 = P_2$Since pressure $P = \frac{F}{A}$,we have:$\frac{F_1}{A_1} = \frac{F_2}{A_2}$From the diagram,it is clear that the area at side $1$ $(A_1)$ is smaller than the area at side $2$ $(A_2)$,i.e.,$A_1 Rearranging the equation for force $F_2$:$F_2 = F_1 	imes \frac{A_2}{A_1}$Since $\frac{A_2}{A_1} > 1$,it follows that $F_2 > F_1$,or $F_1 Therefore,the force at side $1$ is less than the force at side $2$.

The diagram below shows a hydraulic lift. $A$ force is applied at side $1$ and an output force is generated at side $2$. Which of the following is true?

Similar Questions

Increase in pressure at one point of the enclosed liquid in equilibrium of rest is transmitted equally to all other points of liquid. This is as per ...........

Write a short note on hydraulic brakes.

The area of cross-section of the wider tube shown in the figure is $800 \ cm^2$. If a mass of $12 \ kg$ is placed on the massless piston,the difference in heights $h$ in the level of water in the two tubes is ........ $cm$.

$A$ hydraulic lift is shown in the figure. The radii of the movable pistons $P_1$ and $P_2$ are $2 \ m$ and $5 \ m$ respectively. If a block of mass $x$ is placed on $P_2$,then the minimum mass that should be kept on $P_1$ to lift the block on $P_2$ is (in $x$)

$A$ hydraulic lift as shown in the figure is used to lift a mass of $1000 \ kg$, which is placed on a piston $(P_1)$ of area $1 \ m^2$. If the cross-section area of the piston $(P_2)$ at the other end is $0.01 \ m^2$, then how much mass needs to be put on it to lift the $1000 \ kg$ (in $kg$)?

Vedclass Test Series

Exam Paper Generator

Online Exam Module