The diameter of a wire is measured with a screw gauge having a least count of $0.01\;mm$. Which of the following correctly expresses the diameter?

Length of $9 \ MSD$ of a vernier caliper are equal to $10 \ VSD$ and $1 \ MSD = 1 \ mm$. For measuring the length of a rod,the reading on the main scale is $6.4 \ cm$ and the $8^{th}$ division on the vernier scale is in line with a marking on the main scale. If there is no zero error,find the length of the rod: (in $cm$)

Two full turns of the circular scale of a screw gauge cover a distance of $1 \ mm$ on its main scale. The total number of divisions on the circular scale is $50$. The screw gauge has a zero error of $-0.03 \ mm$. While measuring the diameter of a thin wire,a student notes the main scale reading of $3 \ mm$ and the $35^{\text{th}}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the wire is: (in $mm$)

The internal and external diameters of a hollow cylinder measured with vernier calipers are $(5.73 \pm 0.01) \text{ cm}$ and $(6.01 \pm 0.01) \text{ cm}$ respectively. Then the thickness of the cylinder wall is

In an experiment,the angles are required to be measured using an instrument where $29$ divisions of the main scale exactly coincide with $30$ divisions of the vernier scale. If the smallest division of the main scale is half a degree $(= 0.5^\circ)$,then the least count of the instrument is:

The pitch of a screw gauge is $0.5 \ mm$ and there are $100$ divisions on its circular scale. The instrument reads $+2$ divisions on the circular scale when nothing is placed between its jaws. In measuring the diameter of a wire,there are $8$ divisions on the main scale and the $83^{rd}$ division of the circular scale coincides with the reference line. Then the diameter of the wire is (in $mm$)