The elastic limit of a metal is frac{400}{pi} | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. The elastic limit is the maximum stress the material can

Vedclass · Accepted Answer

$2.2$

Vedclass · Answer

(A) The stress $\sigma$ is defined as the force $F$ divided by the cross-sectional area $A$. The elastic limit is the maximum stress the material can withstand.Given: Elastic limit $\sigma = \frac{400}{\pi} 	ext{ MPa} = \frac{400}{\pi} 	imes 10^6 	ext{ Pa}$, Force $F = 484 	ext{ N}$.The area of the cross-section of a rod with diameter $d$ is $A = \pi \frac{d^2}{4}$.Using the formula $\sigma = \frac{F}{A}$, we have:$\frac{400}{\pi} 	imes 10^6 = \frac{484}{\pi \frac{d^2}{4}}$$\frac{400}{\pi} 	imes 10^6 = \frac{484 	imes 4}{\pi d^2}$Canceling $\pi$ from both sides:$400 	imes 10^6 = \frac{1936}{d^2}$$d^2 = \frac{1936}{400 	imes 10^6} = 4.84 	imes 10^{-6} 	ext{ m}^2$$d = \sqrt{4.84 	imes 10^{-6}} = 2.2 	imes 10^{-3} 	ext{ m} = 2.2 	ext{ mm}$.

The elastic limit of a metal is $\frac{400}{\pi} \text{ MPa}$. If a rod of this metal is to support a $484 \text{ N}$ load without exceeding its elastic limit, the minimum diameter of the rod is: (in $\text{ mm}$)

Similar Questions

$A$ force $F$ is needed to break a copper wire having radius $R$. The force needed to break a copper wire of radius $2R$ will be

Write the limitation of Hooke's law.

The ratio of radii of two wires of same material is $2: 1$. If these wires are stretched by equal force,the ratio of stresses produced in them is .............

If the length of a string is $P$ when the tension in it is $6 \ N$ and its length is $Q$ when the tension in it is $8 \ N$, then the original length of the string is

Shearing stress causes change in

Vedclass Test Series

Exam Paper Generator

Online Exam Module