The electric bulbs have tungsten filaments of | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The power rating of a bulb is given by $P = \frac{V^2}{R}$,where $V$ is the rated voltage and $R$ is the resistance of the filament.Since $V$ is c

Vedclass · Accepted Answer

$100 \, W$ bulb has a thicker filament

Vedclass · Answer

(A) The power rating of a bulb is given by $P = \frac{V^2}{R}$,where $V$ is the rated voltage and $R$ is the resistance of the filament.Since $V$ is constant for both bulbs,$P \propto \frac{1}{R}$.The resistance of a wire is given by $R = \rho \frac{L}{A}$,where $L$ is the length and $A$ is the cross-sectional area (thickness).Given that the lengths $L$ are the same and the material (resistivity $\rho$) is the same,$R \propto \frac{1}{A}$.Substituting this into the power relation,we get $P \propto \frac{1}{1/A} \implies P \propto A$.Therefore,the bulb with higher power $(100 \, W)$ must have a larger cross-sectional area (thicker filament) compared to the bulb with lower power $(60 \, W)$.

The electric bulbs have tungsten filaments of same length. If one of them gives $60 \, W$ and the other $100 \, W$,then:

Similar Questions

The resistance of a conductor at $15^{\circ}C$ is $16\, \Omega$ and at $100^{\circ}C$ is $20\, \Omega$. What will be the temperature coefficient of resistance of the conductor?

$A$ wire of resistance $160\,\Omega$ is melted and drawn into a wire of one-fourth of its original length. The new resistance of the wire will be $......\Omega$.

Identify the correct statement among the following.

$n$ conducting wires of same dimensions but having resistivities $1, 2, 3, . . . , n$ are connected in series. The equivalent resistivity of the combination is

$A$ wire $100\,cm$ long and $2.0\,mm$ diameter has a resistance of $0.7\,\Omega$. The electrical resistivity of the material is ...........$ \times 10^{-6}\,\Omega \cdot m$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module