The force required just to move a body up an inclined plane is double the force required just to prevent the body from sliding down. If the coefficient of friction is $0.25$,the angle of inclination of the plane is ...... $^o$.

$A$ rectangular box lies on a rough inclined surface. The coefficient of friction between the surface and the box is $\mu$. Let the mass of the box be $m$.
$(a)$ At what angle of inclination $\theta$ of the plane to the horizontal will the box just start to slide down the plane?
$(b)$ What is the force acting on the box down the plane,if the angle of inclination of the plane is increased to $\alpha > \theta$?
$(c)$ What is the force needed to be applied upwards along the plane to make the box either remain stationary or just move up with uniform speed?
$(d)$ What is the force needed to be applied upwards along the plane to make the box move up the plane with acceleration $a$?

Two touching blocks $1$ and $2$ are placed on an inclined plane forming an angle $60^{\circ}$ with the horizontal. The masses are $m_1$ and $m_2$ and the coefficients of friction between the inclined plane and the two blocks are $1.5 \mu$ and $1.0 \mu$, respectively. The force of reaction between the blocks during the motion is ($g=$ acceleration due to gravity).

When a body slides down from rest along a smooth inclined plane making an angle of $30^{\circ}$ with the horizontal,it takes time $T$. When the same body slides down from rest along a rough inclined plane making the same angle and through the same distance,it takes time $\alpha T$,where $\alpha$ is a constant greater than $1$. The coefficient of friction between the body and the rough plane is $\frac{1}{\sqrt{x}}\left(\frac{\alpha^{2}-1}{\alpha^{2}}\right)$ where $x = .....$.

$A$ block of mass $m$ is stationary on a rough plane of mass $M$ inclined at an angle $\theta$ to the horizontal,while the whole setup is accelerating upwards at an acceleration $a$. If the coefficient of friction between the block and the plane is $\mu$,then the force that the plane exerts on the block is

$A$ block of mass $2\,\,kg$ is placed on a rough inclined plane as shown in the figure $(\mu = 0.2)$ so that it just touches the spring. The block is allowed to move downwards. The spring will be compressed to a maximum of