The maximum current that can be measured by a galvanometer of resistance $40 \,\Omega$ is $10 \,mA$. It is converted into a voltmeter that can read up to $50 \,V$. The resistance to be connected in series with the galvanometer is ... (in $\Omega$)

  • A
    $5040$
  • B
    $4960$
  • C
    $2010$
  • D
    $4050$

Explore More

Similar Questions

Two identical moving coil galvanometers have $10 \Omega$ resistance and full scale deflection at $2 \mu A$ current. One of them is converted into a voltmeter of $100 \text{ mV}$ full scale reading and the other into an ammeter of $1 \text{ mA}$ full scale current using appropriate resistors. These are then used to measure the voltage and current in the Ohm's law experiment with $R = 1000 \Omega$ resistor by using an ideal cell. Which of the following statement$(s)$ is/are correct?
$(1)$ The measured value of $R$ will be $980.2 \Omega$.
$(2)$ The resistance of the voltmeter will be $50 \text{ k} \Omega$.
$(3)$ The resistance of the ammeter will be $0.02 \Omega$ (rounded off to the $2^{\text{nd}}$ decimal place).
$(4)$ If the ideal cell is replaced by a cell having internal resistance of $5 \Omega$,then the measured value of $R$ will be more than $1000 \Omega$.

$A$ voltmeter has a resistance of $G \, \Omega$ and a range of $V \, \text{volts}$. The value of the resistance that must be connected in series to convert it into a voltmeter of range $nV \, \text{volts}$ is:

$A$ galvanometer having $30$ divisions has a current sensitivity of $0.0625 \frac{\text{div}}{\mu A}$. If it is converted into a voltmeter to read a maximum of $6 \text{ V}$,then the resistance of that voltmeter is:

The sensitivity of a moving coil galvanometer is $s$. If a shunt of $\frac{1}{8}$ of the resistance of the galvanometer is connected to the moving coil galvanometer,what will its new sensitivity be?

$A$ student uses the resistance of a known resistor $(1 \,\Omega)$ to calibrate a voltmeter and an ammeter using the circuits shown below. The student measures the ratio of the voltage to current to be $1 \times 10^3 \,\Omega$ in circuit $(a)$ and $0.999 \,\Omega$ in circuit $(b)$. From these measurements,the resistance (in $\Omega$) of the voltmeter and ammeter are found to be close to

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo