The pitch of the screw gauge is $1\, mm$ and there are $100$ divisions on the circular scale. When nothing is put in between the jaws,the zero of the circular scale lies $8$ divisions below the reference line. When a wire is placed between the jaws,the first linear scale division is clearly visible while $72^{nd}$ division on the circular scale coincides with the reference line. The radius of the wire is.........$mm$

$A$ screw gauge of pitch $0.5\,mm$ is used to measure the diameter of a uniform wire of length $6.8\,cm$. The main scale reading is $1.5\,mm$ and the circular scale reading is $7$. The calculated curved surface area of the wire to appropriate significant figures is $......\,cm^2$. [Screw gauge has $50$ divisions on the circular scale]

Consider a Vernier callipers in which each $1 \ cm$ on the main scale is divided into $8$ equal divisions and a screw gauge with $100$ divisions on its circular scale. In the Vernier callipers,$5$ divisions of the Vernier scale coincide with $4$ divisions on the main scale and in the screw gauge,one complete rotation of the circular scale moves it by two divisions on the linear scale. Then:
$(A)$ If the pitch of the screw gauge is twice the least count of the Vernier callipers,the least count of the screw gauge is $0.01 \ mm$.
$(B)$ If the pitch of the screw gauge is twice the least count of the Vernier callipers,the least count of the screw gauge is $0.005 \ mm$.
$(C)$ If the least count of the linear scale of the screw gauge is twice the least count of the Vernier callipers,the least count of the screw gauge is $0.01 \ mm$.
$(D)$ If the least count of the linear scale of the screw gauge is twice the least count of the Vernier callipers,the least count of the screw gauge is $0.005 \ mm$.

$A$ student performs an experiment of measuring the thickness of a slab with a vernier calliper whose $50$ divisions of the vernier scale are equal to $49$ divisions of the main scale. He noted that the zero of the vernier scale is between $7.00 \; cm$ and $7.05 \; cm$ mark of the main scale and the $23^{rd}$ division of the vernier scale exactly coincides with the main scale. The measured value of the thickness of the given slab using the calliper will be (in $; cm$)

The diameter of a cylinder is measured using a vernier callipers with no zero error. It is found that the zero of the vernier scale lies between $5.10 \ cm$ and $5.15 \ cm$ of the main scale. The vernier scale has $50$ divisions equivalent to $2.45 \ cm$. The $24^{\text{th}}$ division of the vernier scale exactly coincides with one of the main scale divisions. The diameter of the cylinder is: (in $cm$)

Area of the cross-section of a wire is measured using a screw gauge. The pitch of the main scale is $0.5 \text{ mm}$. The circular scale has $100$ divisions and for one full rotation of the circular scale, the main scale shifts by two divisions. The measured readings are listed below.

Measurement condition	Main scale reading	Circular scale reading
Two arms of gauge touching each other without wire	$0$ division	$4$ division
Attempt-$1$: With wire	$4$ division	$20$ division
Attempt-$2$: With wire	$4$ division	$16$ division

What are the diameter and cross-sectional area of the wire measured using the screw gauge?