The ratio of thermal conductivity of two rods $A$ and $B$ with the same area of cross-section is $3: 2$. If the thermal resistance of two rods is the same,then the ratio of length of rod $A$ to length of rod $B$ is

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.

$A$ hollow sphere of inner radius $R$ and outer radius $2R$ is made of a material of thermal conductivity $K$. It is surrounded by another hollow sphere of inner radius $2R$ and outer radius $3R$ made of the same material of thermal conductivity $K$. The inside of the smaller sphere is maintained at $0^oC$ and the outside of the bigger sphere at $100^oC$. The system is in steady state. The temperature of the interface will be ........ $^oC$.

Two identical plates of different metals are joined to form a single plate whose thickness is double the thickness of each plate. If the coefficients of thermal conductivity of each plate are $2$ and $3$ respectively,then the thermal conductivity of the composite plate will be:

Three rods of same dimensions are arranged as shown in the figure. They have thermal conductivities ${K_1}, {K_2}$ and ${K_3}$. The points $P$ and $Q$ are maintained at different temperatures. For the heat to flow at the same rate along the path $PRQ$ and the path $PQ$,which of the following options is correct?

The three rods shown in the figure have identical dimensions. Heat flows from the hot end at a rate of $40 \, W$ in the arrangement $(a)$. Find the rate of heat flow when the rods are joined as in arrangement $(b)$ (Assume $K_{Al} = 200 \, W/m^{\circ}C$ and $K_{Cu} = 400 \, W/m^{\circ}C$). (in $, W$)