The time taken for the magnetic energy to rea | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The magnetic energy stored in an inductor is given by $U = \frac{1}{2} L i^2$.Let $U_{max}$ be the maximum energy,which occurs when the current re

Vedclass · Accepted Answer

$\frac{L}{R} \ln 2$

Vedclass · Answer

(C) The magnetic energy stored in an inductor is given by $U = \frac{1}{2} L i^2$.Let $U_{max}$ be the maximum energy,which occurs when the current reaches its maximum value $i_0$. Thus,$U_{max} = \frac{1}{2} L i_0^2$.We are given that the energy reaches $25\%$ of its maximum value:$U = 0.25 U_{max} = \frac{1}{4} (\frac{1}{2} L i_0^2) = \frac{1}{2} L (\frac{i_0}{2})^2$.Comparing this with $U = \frac{1}{2} L i^2$,we find that the current $i$ must be $\frac{i_0}{2}$.The expression for current in an $RL$ circuit during charging is $i = i_0 (1 - e^{-Rt/L})$.Setting $i = \frac{i_0}{2}$,we get: $\frac{i_0}{2} = i_0 (1 - e^{-Rt/L})$.$\frac{1}{2} = 1 - e^{-Rt/L} \Rightarrow e^{-Rt/L} = \frac{1}{2}$.Taking the natural logarithm on both sides: $-\frac{Rt}{L} = \ln(\frac{1}{2}) = -\ln 2$.Therefore,$t = \frac{L}{R} \ln 2$.

The time taken for the magnetic energy to reach $25\%$ of its maximum value,when a solenoid of resistance $R$ and inductance $L$ is connected to a battery,is:

Similar Questions

$A$ solenoid has an inductance of $60 \, H$ and a resistance of $30 \, \Omega$. If it is connected to a $100 \, V$ battery,how long will it take for the current to reach $\frac{e-1}{e} \approx 63.2\%$ of its final value?

In which of the following circuits is the current maximum just after the switch $S$ is closed?

In series with a $20 \ \Omega$ resistor,a $5 \ H$ inductor is placed. To this combination,an $e.m.f.$ of $5 \ V$ is applied. What will be the rate of increase of current at $t = 0.25 \ s$?

The total heat produced in resistor $R$ in an $RL$ circuit when the current in the inductor decreases from $I_0$ to $0$ is

In the circuit shown,the switch $S$ is initially open. The switch $S$ is closed at $t = 0$. The difference between the maximum and minimum current that can flow in the circuit is.....$A$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module