The upper end of a wire $1\,m$ long and $4\,mm$ radius is clamped. The lower end is twisted by an angle of $30^\circ$. The angle of shear is ...... $^\circ$.

$A$ uniform wire of length $L$ and radius $r$ is twisted by an angle $\alpha$. If the modulus of rigidity of the wire is $\eta$,then the elastic potential energy stored in the wire is .........

$A$ steel plate of face area $1 \, cm^2$ and thickness $4 \, cm$ is fixed rigidly at the lower surface. $A$ tangential force $F = 10 \, kN$ is applied on the upper surface as shown in the figure. The lateral displacement $x$ of the upper surface with respect to the lower surface is .............. $m$ (Modulus of rigidity for steel is $8 \times 10^{11} \, N/m^2$).

As shown in the figure,forces of $10^5\,N$ each are applied in opposite directions on the upper and lower faces of a cube of side $10\,cm$,shifting the upper face parallel to itself by $0.5\,cm$. If the side of another cube of the same material is $20\,cm$,then under similar conditions as above,the displacement will be ......... $cm$.

The upper end of a wire of diameter $12\,mm$ and length $1\,m$ is clamped and its other end is twisted through an angle of $30^{\circ}$. The angle of shear is $........^{\circ}$.

$A$ rectangular metallic block of dimensions $40 \text{ mm} \times 20 \text{ mm}$ when pulled with a tension of $50 \text{ kN}$ undergoes only elastic deformation. The strain in the block is (The shear modulus of the material of the block is $40 \times 10^9 \text{ Nm}^{-2}$)