The vernier calliper used for measurement has a positive zero error of $0.3 \ mm$. While taking measurement for the internal diameter of a vessel,it was observed that the zero of the vernier scale lies between $9.5 \ cm$ and $9.6 \ cm$ of the main scale and the $6^{th}$ division of the vernier scale coincides with a main scale division. If the least count of the vernier calliper is $0.01 \ cm$,the correct value of the diameter will be: (in $cm$)

$A$ plano-convex lens of unknown material and unknown focal length is given. With the help of a Spherometer,we can measure the,

In a screw gauge, the zero of the main scale reference line coincides with the fifth division of the circular scale when two studs are in contact. There are $100$ divisions on the circular scale and the pitch of the screw gauge is $0.1 \text{ mm}$. When the diameter of a sphere is measured, the reading of the main scale is $5 \text{ mm}$ and the $50^{th}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the sphere is . . . . . . $\text{mm}$.

In a Vernier Calipers,$10$ divisions of the Vernier scale are equal to $9$ divisions of the main scale. When both jaws of the Vernier calipers touch each other,the zero of the Vernier scale is shifted to the left of the zero of the main scale,and the $4^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. One main scale division is equal to $1\,mm$. While measuring the diameter of a spherical body,the body is held between the two jaws. It is observed that the zero of the Vernier scale lies between $30$ and $31$ divisions of the main scale,and the $6^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. The diameter of the spherical body is $.......\,cm$.

One main scale division of a vernier callipers is $a \ cm$ and $n^{\text{th}}$ division of the vernier scale coincides with $(n-1)^{\text{th}}$ division of the main scale. The least count of the callipers in $mm$ is

The main scale division of a vernier caliper is $1 \ mm$. The vernier scale divisions are in an arithmetic progression $(A.P.)$; the $1^{st}$ division is $0.95 \ mm$, the $2^{nd}$ division is $0.90 \ mm$, and so on. When an object is placed between the jaws of the vernier caliper, the zero of the vernier scale lies between $3.1 \ cm$ and $3.2 \ cm$, and the $4^{th}$ division of the vernier scale coincides with a main scale division. The reading of the vernier caliper is .......... $cm$.